Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (13,190 to 13,200 of 13,366 results)

Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (710 to 720 of 2,038 results)

  • Surveys and statistical programs – Documentation: 62F0026M2005005
    Description:

    This discussion paper reviews the previous research into the subject of presenting historical time series and comparisons in constant dollars for the Survey of Household Spending (SHS), and its predecessor the Family Expenditure Survey (FAMEX). It examines two principal methods of converting spending data into constant dollars. The purpose of this discussion paper is to show interested parties how the two methods differ in complexity of implementation and interpretation.

    Release date: 2005-07-15

  • Surveys and statistical programs – Documentation: 92-404-G
    Description:

    This guide will provide users of census data with an understanding of the differences between the NAICS97 and the SIC80, and the impact of those differences on census industry data.

    Release date: 2005-07-12

  • Surveys and statistical programs – Documentation: 62F0026M2005004
    Description:

    The Food Expenditure Survey (FES) is a periodic survey collecting data from households on food spending habits. Data are collected mainly using weekly diaries of purchases that the respondents must fill in daily during two consecutive weeks.

    This paper presents a detailed description of the methodology of this survey. First, we briefly described the sample design which is mainly based on the plan of the Labour Force Survey. Then we present the methods of collection, data processing, weighting, and variance estimation, as well as the suppression of unreliable data in the tables of estimates.

    Release date: 2005-07-08

  • Surveys and statistical programs – Documentation: 62F0026M2005002
    Description:

    This document will provide an overview of the differences between the old and the new weighting methodologies and the effect of the new weighting system on estimations.

    Release date: 2005-06-30

  • 715. The CRISP-NLSCY files Archived
    Notices and consultations: 12-002-X20050018033
    Description:

    Dr. J. Douglas Willms, and his staff at the Canadian Research Institute for Social Policy (CRISP) at the University of New Brunswick (Fredericton Campus), have developed a set of files for researchers interested in using Statistics Canada's National Longitudinal Survey of Children and Youth (NLSCY) data sets. "The Files" consist of SPSS data and syntax, which are intended to assist researchers in conducting more efficient longitudinal analyses, using NLSCY data.

    Release date: 2005-06-23

  • Surveys and statistical programs – Documentation: 75F0002M2005005
    Description:

    The Survey of Labour and Income Dynamics (SLID) conducts two annual interviews: the Labour interview in January and the Income interview in May. The data are collected using computer-assisted interviewing. Thus there are no paper questionnaires required for data collection. The questions, responses and interview flow for Labour and Income are documented in other SLID research papers. This document presents the information for the 2004 Entry Exit portion of the Labour and the Income interviews (for the 2003 reference year).

    The Entry Exit Component consists of five separate modules. The Entry module is the first set of data collected. It is information collected to update household composition and place of residence. For each person identified in Entry, the Demographics module collects (or updates) the person's name, date of birth, sex and marital status. Then the Relationships module identifies (or updates) the relationship between each respondent and every other household member. Relationship data is not collected in the May Income interview. The Exit module includes questions on who to contact for the next interview and the names, phone numbers and addresses of two contacts to be used only if future tracing of respondents is required. An overview of the Tracing module is also included in this document.

    Release date: 2005-06-16

  • Surveys and statistical programs – Documentation: 75F0002M2005006
    Description:

    A preliminary interview of background information is collected for all respondents aged 16 and over, who enter the sample for the Survey of Labour and Income Dynamics (SLID). For the majority of the longitudinal respondents, this occurs when a new panel is introduced and the preliminary information is collected during the first Labour interview. However, all persons living with a longitudinal respondent are also interviewed for SLID. Thus Preliminary interviews are conducted for new household members during their first Labour interview after they join the household. Longitudinal persons who have turned 16 while their household is in the SLID sample are then eligible for SLID interviews so they are asked the Preliminary interview questions during their first Labour interview.

    The purpose of this document is to present the questions, possible responses and question flows for the 2004 Preliminary questionnaire (for the 2003 reference year).

    Release date: 2005-06-16

  • Surveys and statistical programs – Documentation: 75F0002M2005007
    Description:

    Every January, the Survey of Labour and Income Dynamics (SLID) Labour interview is conducted using computer-assisted interviewing (CAI). CAI is paperless interviewing. This document is therefore a written approximation of the CAI interview, or the questionnaire.

    A labour interview is collected for all respondents 16 years of age and over. In January, 2004 data was collected for reference year 2003 from panels 3 and 4. Panel 3, in its fifth year, consisted of approximately 17,000 households and panel 4, in its second year, also consisted of approximately 17,000 households.

    This document outlines the structure of the January 2004 Labour interview (for the 2003 reference year) including question wording, possible responses, and flows of questions.

    Release date: 2005-06-16

  • Surveys and statistical programs – Documentation: 75F0002M2005008
    Description:

    In May 2004 the Survey of Labour and Income Dynamics (SLID) collected data on income from both its third and fourth panels. Panel 3 was in its fifth year of collection and panel 4 was in its second year.

    Respondents had the option of answering income questions in an interview, or of giving permission to Statistics Canada to allow SLID to use the information on their income tax return.

    The purpose of this document is to present the questions, possible responses and question flows for the 2004 Income questionnaire (for the 2003 reference year).

    Release date: 2005-06-16

  • Notices and consultations: 92-132-X
    Description:

    This report describes the comments received as a result of the second round of the 2006 Census consultations. As with the previous 2006 Census consultation, this second round of consultations integrated discussions on the dissemination program, questionnaire content and census geography. However, the focus of this second round of consultations was placed on the 2001 Census of Population dissemination program and proposed directions for 2006 geography. Consultations were held from January to June 2004. Approximately 1,000 comments were captured through written submissions and the organization of over 40 meetings across Canada.

    This report describes users' feedback on dissemination and geography issues received through this second round of consultations. In addition to user's comments, web metrics information serves as a valuable tool when evaluating the accessibility of public good data tables. Therefore, page view counts have been integrated in this report.

    Some general planning assumptions that focus on the production and dissemination of 2006 Census products are also included in this report.

    Release date: 2005-05-31