Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,400 to 12,410 of 13,366 results)

  • Table: 36-10-0281-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 6 series, with data for years 1926 - 1975 (not all combinations necessarily have data for all years), and was last released on 2000-02-18. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...), Civilian labour force (6 items: Total civilian labour force; Civilian labour force; employed; agricultural; Total civilian labour force; employed; Civilian labour force; employed; non-agricultural ...).
    Release date: 2000-02-18

  • Table: 16-10-0064-01
    Frequency: Quarterly
    Description: This table contains 5 series, with data for years 1996 - 1999 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (5 items: Refined sugar, total shipments; Stocks of refined sugar, end of period; Raw cane sugar, acquisitions; Raw cane sugar stocks, end of period; ...).
    Release date: 2000-02-18

  • 12,403. Cable television, 1998 Archived
    Table: 56-001-X19990035191
    Description:

    The cable and other program distribution industry has reported revenues of $3.1 billion in 1998, a 10.0% increase over 1997. This relatively strong growth is due in large part to the fast growing non-basic services segment. While revenue from basic services grew moderately (2.1%) revenue from non-basic and other services increased by 29.0%.

    Release date: 2000-02-11

  • Table: 92F0138M2000001
    Description: With this working paper, Statistics Canada is releasing 1991 Census data tabulated by a new geographic classification called "census metropolitan area and census agglomeration influenced zones", or MIZ. This classification applies to census subdivisions (municipalities) that lie outside census metropolitan areas and census agglomerations. This part of Canada covers 96% of the country's total land mass and contains 22% of its population, yet up to now we have been limited in our means of differentiating this vast area. The MIZ classification shows the influence of census metropolitan areas (CMA) and census agglomerations (CA) on surrounding census subdivisions as measured by commuting flows based on 1991 Census place of work data. This version of the MIZ classification also incorporates a preliminary version of a north concept that flags census subdivisions according to their location in the north or south of Canada.

    The series of tables presented here show detailed demographic, social and economic characteristics for Canada as a whole, for the six major regions of Canada, and for individual provinces and territories. Within each table, the data are subdivided into five categories: census metropolitan area or census agglomeration, strong MIZ, moderate MIZ, weak MIZ and no MIZ. Within each of these categories, the data are further subdivided into north and south.

    Readers are invited to review and use the data tables to assess whether this combined MIZ and north/south classification of non-CMA/CA areas provides sufficient detail to support data analysis and research. The intent of this MIZ classification is to reveal previously hidden data detail and thereby help users address issues related to this vast geographic area.

    This is the first of three related Geography working papers (catalogue no. 92F0138MPE). The second working paper (no. 2000-2, 92F0138MPE00002) provides background information about the methodology used to delineate the MIZ classification. The third working paper (no. 2000-3, 92F0138MPE00003) describes the methodology used to define a continuous line across Canada that separates the north from the south to further differentiate the MIZ classification.

    Release date: 2000-02-03

  • Table: 85F0018X
    Description:

    This document brings together data from a number of Statistics Canada surveys and provides a visual perspective on the following subject areas: crime, police administration, adult and youth court activity, the correctional population, costs of the criminal justice system, violence against women, Canadians' experiences with crime, and their perceptions and fears of crime.

    Release date: 1999-11-29

  • Table: 84-214-X
    Description:

    This compendium of vital statistics includes summary data on births, deaths, marriages and divorces. The introduction covers the data sources, data quality, and methods pertaining to each event, and includes a glossary defining the terms used. The first chapter is a brief overview of vital statistics for 1996. Subsequent chapters treat marriage, divorce, birth, fetal and infant mortality, total mortality, causes of death, vital statistics by census division, and international comparisons. Most charts and tables show Canada data for 1986 though 1996, while the charts and tables for causes of death show Canada data for 1979 through1996. Data for the provinces and territories are usually shown for 1995 and 1996. Appendices include population denominator data, age-standardized mortality rate (ASMR) calculation methods, and leading causes of death methodology.

    Release date: 1999-11-25

  • Public use microdata: 12M0012X
    Geography: Province or territory
    Description:

    Cycle 12 collected data from persons 15 years and older. The core content of time use repeats that of cycle 7 (1992) and cycle 2 (1986), and provides data on the daily activities of Canadians. Question modules were also included on unpaid work activities, cultural activities and participation in sports. The target population of the General Social Survey consisted of all individuals aged 15 and over living in a private household in one of the ten provinces.

    Release date: 1999-11-09

  • Table: 50-002-X19990054722
    Description:

    Operating ratios for top carriers improved by one point in the first and second quarter of 1999 over the same period one year earlier. Average revenue per carrier fell 1% in the first quarter and rose only 3% in the second quarter.

    Release date: 1999-11-04

  • Table: 50-002-X19990054723
    Description:

    On an industry wide basis, Canadian bus companies continue to grow and prosper. Gross revenues in 1998 (excluding subsidies) were 8.6 percent higher than in 1995.

    Release date: 1999-11-04

  • Table: 50-002-X19990054724
    Description:

    With the exception of the third quarter (0.94), for-hire motor carriers of freight posted seasonally adjusted operating ratios of 0.93 in three out of the four quarters of 1998.

    Release date: 1999-11-04
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (630 to 640 of 2,038 results)

  • Surveys and statistical programs – Documentation: 15-206-X2007014
    Description: The Canadian Productivity Accounts (CPA) of Statistics Canada maintain two multifactor productivity (MFP) programs.

    The Major Sector Multifactor Productivity Program develops the indexes of MFP for the total business sector and major industry groups in the business sector.

    The Industry Multifactor Productivity Program or the Industry KLEMS Productivity Program develops the industry productivity database that includes MFP indexes, output, capital (K), labour (L), energy (E), materials (M) and services (S) inputs for the individual industries of the business sector at various levels of industry aggregation. This paper describes the methodologies and data sources that are used to construct the major sector MFP indexes and the industry productivity database (or the KLEMS database). More specifically, this paper is meant to: provide a background of the major sector MFP program and the industry KLEMS productivity program; present the methodology for measuring MFP; describe the data sources and data available from the MFP programs; present a quality rating of the industry KLEMS productivity data; and describe the research agenda related to the MFP program.

    Release date: 2007-12-06

  • Surveys and statistical programs – Documentation: 16-001-M2007004
    Description:

    Statistics Canada administers a number of environmental surveys that fill important data gaps but also pose numerous challenges to administer. This paper focuses on two on-going environment surveys - one newly initiated and one in the process of a redesign.

    Release date: 2007-11-23

  • Surveys and statistical programs – Documentation: 11-533-X
    Description:

    This guide has been created especially for users needing a step-by-step review on how to find, read and use data, with quick tips on locating information on the Statistics Canada website. Originally published in paper format in the 1980s, revised as part of the 1994 Statistics Canada Catalogue, and then transformed into an electronic version, this guide is continually being updated to maintain its currency and usefulness.

    Release date: 2007-11-19

  • Surveys and statistical programs – Documentation: 97-553-G
    Description: This guide focuses on the following topic: Family variables.
    Release date: 2007-10-31

  • Surveys and statistical programs – Documentation: 81-595-M2007056
    Geography: Canada
    Description: This handbook discusses the collection and interpretation of statistical data on Canada's trade in culture services.
    Release date: 2007-10-31

  • Surveys and statistical programs – Documentation: 97-553-G2006003
    Description:

    This guide focuses on the following topic: Family variables.

    Provides information that enables users to effectively use, apply and interpret data from the 2006 Census. Each guide contains definitions and explanations on census concepts, data quality and historical comparability. Additional information will be included for specific variables to help general users better understand the concepts and questions used in the census.

    Release date: 2007-10-31

  • Notices and consultations: 13-605-X200700610374
    Description:

    Effective with the 2006 Provincial Economic Accounts release on November 8, 2007, the expenditure-based gross domestic product (GDP) will be converted to a 2002 reference year for its volume and price estimates.

    On October 31, 2007, the monthly gross domestic product (GDP) by industry estimates will use the North American Industry Classification System, NAICS 2002, and will convert to reference year 2002 for its volume estimates.

    Release date: 2007-10-25

  • Surveys and statistical programs – Documentation: 15-206-X2007012
    Description: This paper examines the various products associated with the quarterly labour productivity program. It outlines the nature of the volatility in the very short-run estimates and examines properties of the revisions made to the estimates of Canadian labour productivity and its components (gross domestic product and hours worked) since the inception of the program in 2001.
    Release date: 2007-10-18

  • Surveys and statistical programs – Documentation: 16-001-M2007003
    Description:

    The objective of the present study is to understand and explain how the Canadian Council of Ministers of the Environment (CCME) Water Quality Index (WQI) behaves, and at the same time determine its limitations to make a better use of it in the future. In order to do so, four data sets were made available to us thanks to participation of the following provinces: Newfoundland, Ontario, British Columbia and Quebec.

    Release date: 2007-09-19

  • Notices and consultations: 11-015-X
    Description: This newsletter is a brief description of projects within the Business and Labour Market Analysis Division of Statistics Canada. The research covers a wide range of topics including labour market issues, low income, immigration, business firm dynamics, pensions, productivity, technology and innovation, as well as economic geography.
    Release date: 2007-09-14