Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,090 to 12,100 of 13,366 results)

  • Table: 23-10-0113-01
    Frequency: Quarterly
    Description:

    This table contains 12 series, with data for years 1999 - 1999 (not all combinations necessarily have data for all years), and was last released on 2002-08-19. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada excluding Territories), Type of vehicle (2 items: Trucks 4.5 tonnes to 14.9 tonnes; Trucks 15 tonnes and over), Purpose of trip (6 items: Total, all trip purposes; Carrying goods or equipment; No cargo; To or from work; ...).

    Release date: 2002-08-19

  • Table: 23-10-0126-01
    Frequency: Quarterly
    Description: This table contains 16 series, with data for years 1999 - 1999 *not all combinations necessarily have data for all years), and was last released on 2002-08-19. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada excluding Territories ...), Type of vehicle (2 items: Car and station wagon; Other vehicle up to 4.5 tonnes ...), Purpose of trip (8 items: Total; all trip purposes; To or from shopping or errands; To or from recreational or social activity; To or from work or school ...).
    Release date: 2002-08-19

  • Table: 23-10-0127-01
    Frequency: Quarterly
    Description: This table contains 16 series, with data for years 1999 - 1999 (not all combinations necessarily have data for all years), and was last released on 2002-08-19. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada excluding Territories ...), Type of vehicle (2 items: Car and station wagon; Other vehicle up to 4.5 tonnes ...), Purpose of trip (8 items: Total; all trip purposes; To or from shopping or errands; To or from recreational or social activity; To or from work or school ...).
    Release date: 2002-08-19

  • 12,094. Labour Force Information Archived
    Table: 71-001-P
    Description:

    This publication provides the most current monthly labour market statistics. Each month, this publication contains a brief commentary highlighting recent developments in the Canadian labour market. It also includes a series of charts and tables on a variety of labour force characteristics, such as employment and unemployment for Canada, the provinces, metropolitan areas and economic regions.

    Release date: 2002-08-09

  • Table: 55-001-X
    Description:

    This on-line publication covers the activities of the major pipelines carrying crude oil and equivalents, liquefied petroleum gases such as propane, butane, ethane and others within and between provinces. The data are collected by province for receipts, deliveries, imports, exports and inventories.

    Release date: 2002-07-24

  • Table: 53-215-X
    Description:

    Investment, operating revenues, expenses, and other statistics on urban transit system, intercity, charter, sightseeing and shuttle services are outlined in this on-line publication. Also included are data analysis, methodologies, a glossary and an excerpt on data quality. Beginning in 1997 immediately following the presentation of data is a special analytical study.

    Release date: 2002-07-22

  • Table: 93F0050X
    Description: This series of 13 tables presents the 2001 and 1996 population counts and the 2001 dwellings counts established by the 2001 Census of Canada. The levels of geography covered are as follows: provinces and territories, census divisions, census subdivisions, designated places, census metropolitan areas and census agglomerations, federal electoral districts (1996 Representation Order), and urban and rural areas.
    Release date: 2002-07-16

  • 12,098. Age and Sex, 2001 Census Archived
    Table: 97F0003X
    Description: The tables in the topic "Age and Sex" provides age and sex distributions for the entire population of Canada. The 2001 Census data show the age group structure of the Canadian population and are used to calculate indicators of aging for each province and territory.
    Release date: 2002-07-16

  • Table: 97F0024X2001001
    Description:

    These data tables present 2001 Census highlights on age and sex and show distribution by broad age group and sex, as well as distribution by median age and sex.

    These tables were available on the official day of release for each of the census topics at various levels of geography. They present information highlights through key indicators, such as distributions and percentage changes from 1996. The tables also allow users to perform simple rank and sort functions.

    Release date: 2002-07-16

  • Table: 95F0300X2001001
    Description:

    This table shows 2001 Census data for Canada, provinces, territories, census divisions, census subdivisions and dissemination areas.

    The table is part of the topic «Age and Sex,» which presents 2001 Census data on age and sex distributions for the entire population of Canada. The 2001 Census data show the structure of the Canadian population by age group and are used to calculate indicators of aging for each province and territory.

    It is also possible to subscribe to all the day-of-release bundles. Refer to Catalogue No. 97F0023XCB for more information.

    Release date: 2002-07-16
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (1,510 to 1,520 of 2,038 results)

  • Surveys and statistical programs – Documentation: 3810
    Description: The Travel Survey of Residents of Canada (TSRC) is a major source of data used to measure the size and status of Canada's tourism industry. It was developed to measure the volume, the characteristics and the economic impact of domestic travel. Since the beginning of 2005 this survey replaces the Canadian Travel Survey (CTS).

  • Surveys and statistical programs – Documentation: 3812
    Description: Data from this survey is used to assist in the formulation of transportation policies and planning. The survey collects data from individuals traveling to work from randomly chosen households in Canada.

  • Surveys and statistical programs – Documentation: 3813
    Description: The data collected are used to examine trends in the smoking behaviour of the Canadian population 15 years of age and over. The primary focus of the analysis of the data is on three specific groups: non-smokers, regular cigarette smokers and occasional cigarette smokers.

  • Surveys and statistical programs – Documentation: 3814
    Description: The purpose of this survey is to gather data needed by governments as input to economic planning and for the provision of social services such as schools, etc.

  • Surveys and statistical programs – Documentation: 3815
    Description: This survey is aimed at determining directly who reads, how much reading is done and what is read, including types of material and subject matter. Also general leisure time activity data were updated.

  • Surveys and statistical programs – Documentation: 3821
    Description: The purpose of this survey was to identify: the actual and the desired participation patterns of persons inactive due to labour market conditions or their own preferences; the type of work desired by such individuals; those persons who have become discouraged looking for work and believe that no suitable jobs were available; and those persons who were seriously interested in taking a job but who knew that jobs were not available in their community until some future time, due to seasonal or economic conditions.

  • Surveys and statistical programs – Documentation: 3822
    Description: This survey identified the reasons why trips were taken as well as what motivated the traveller in the first place.

  • Surveys and statistical programs – Documentation: 3823
    Description: The Postsecondary Student Survey was designed to address such things as: 1) access to postsecondary education; 2) part-time and full-time study and employment; 3) students' income and expenditures; and 4) issues such as mobility, language and Canadian Studies.

  • Surveys and statistical programs – Documentation: 3824
    Description: The survey was conducted by Statistics Canada on behalf of Offord Centre for Child Studies at McMaster University in Hamilton, Ontario. The purpose of the Ontario Child Health Study (OCHS) is to collect up-to-date information about children and youth's mental health in Ontario.

  • Surveys and statistical programs – Documentation: 3828
    Description: The objectives of the HPS were to update and expand the national and provincial baseline data on the knowledge, attitudes, beliefs, intentions and behaviours of adult Canadians on a wide range of health promotion issues.