Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (10,860 to 10,870 of 10,894 results)

  • Articles and reports: 12-001-X197700100006
    Description: The problem considered is the estimation of population total of some characteristic from a simple random sample containing a few large or extreme observations. The effect of these large units in the sample is to distort the estimate of the population total. It is therefore important to correct the weights for such units or deflate their values at the estimation stage once they have been sampled and identified as unusually large units. In this paper, three estimators which alter the usual sampling weights have been considered. The efficiencies of these estimators have been worked out in terms of the ratio of the variance of the usual estimator of the population total to the mean square error of these estimators. An empirical study of these estimators is also discussed.
    Release date: 1977-06-20

  • Articles and reports: 12-001-X197700100007
    Description: The paper attempts to examine some of the procedures used for compensation for non-response. Using the concept of response probabilities, a simple response - non-response error model is developed and the components of response and non-response errors are identified under various imputation procedures. A graph is also given in order to provide an idea of the magnitude of the non­response bias in a particular situation. Two examples of the practical application of imputation are discussed.
    Release date: 1977-06-20

  • Articles and reports: 12-001-X197600200001
    Description: This paper presents results on rotation group biases in the Canadian Labour Force Survey (LFS). The biases are studied in detail by decomposition into components responsible for the biases. Also, a comparison between the old and the new LFS is done on the basis of 1975 parallel run and differences are analyzed. Some conclusions are drawn and recommendations for other studies presented.
    Release date: 1976-12-13

  • Articles and reports: 12-001-X197600200002
    Description: To obtain estimates of means or totals for a universe, a sample of units is often drawn to represent the universe and these units are then surveyed. One of the most important procedures used in the selection of the units is that of stratification, whereby the universe is split up into strata and independent samples of units are drawn from each stratum. A stratification index is developed to indicate the approximate fractional reduction in the sampling variance from that which would result if no stratification were undertaken. Also the methodology is extended to examine the effect of stratification on the sampling variance at different levels of stratification through the concept of a summary index. The stratification index is also extended to the case of ratio estimates using independent source data to re-weight the sample data. The index has been applied to the Canadian Labour Force Survey (LFS), a typical multi-stage stratified sample where ratio estimation, using projected age-sex population estimates is applied and empirical data are presented and analyzed.
    Release date: 1976-12-13

  • Articles and reports: 12-001-X197600200003
    Description: The 1974 Survey of Housing Units was carried out by Statistics Canada on behalf of the Central Mortgage and Housing Corporation during the autumn of 1974. Statistics Canada's responsibilities on this project included the design and implementation of all phases of the survey up to and including the production of "clean" micro data tapes. The sponsoring department was in turn responsible for the specification of objectives and data requirements and for the analysis of the resulting data.

    This report, which is a modification of the summary report produced by the project team at the conclusion of the project, provides a general description of the survey and the work done by Statistics Canada on the survey.
    Release date: 1976-12-13

  • Articles and reports: 12-001-X197600200004
    Description: Published reports for the 1976 Census will include estimates of Total Variance as indicators of the reliability of the figures in these reports. In order to obtain these estimates of Total Variance, an Interpenetrating Design Experiment was incorporated into the collection methods for a sample of enumeration areas. In this paper we derive the formula for Total Variance in terms of variances due to sampling, correlated response and simple response. We then show how the Total Variance, and its components, can be estimated from the design and we give the estimators that will be used for the 1976 Census. The estimates of sampling and correlated response variance are unbiased but the simple response variance estimate is not.
    Release date: 1976-12-13

  • Articles and reports: 12-001-X197600200005
    Description: The 1971 Reverse Record Check is one of the most important studies that were carried out as part of the 1971 Census Evaluation Programme. Its main purpose was to investigate the incidence of under-enumeration in the 1971 Census. To do this, a frame containing all persons who should be enumerated in the 1971 Census was built up from the 1966 Census returns, plus birth and immigrant registrations. A random sample was selected from the frame and each selected person was traced to his current Census address. Current Census returns were then checked to see whether or not the selected person was enumerated. Sample figures were weighted up to the population level to obtain estimates of undercoverage. This paper gives a general description of the methodology of this study, and indicates some of the resulting improvements incorporated for 1976.
    Release date: 1976-12-13

  • Articles and reports: 12-001-X197600200006
    Description: The negative moments of the positive hypergeometric distribution are often approximated by the inverse of the positive moments of this distribution. In this paper, a suitable approximation to the positive hypergeometric distribution is used to obtain the negative moments.
    Release date: 1976-12-13

  • Articles and reports: 12-001-X197600200007
    Description: Three Ontario pilot hog surveys were conducted in 1975 to test a sampling method based on the simultaneous use of two list frames. This paper describes the different aspects of the experience. Particular emphasis is given to the double frame methodology such as discussed by Hartley [11]. Optimal allocation of the sample between frames is considered, with revision for each following survey based on all the accumulated results.
    Release date: 1976-12-13

  • Articles and reports: 12-001-X197600100001
    Description: The 1974 Pilot Auto Exit Survey tested three variants of a handout, mailback questionnaire for U.S. visitors leaving Canada, in a search for a reliable low-cost method of data collection. The sample design was based on a personal interview survey done in Ontario in 1973/74. This design, results of the Pilot, comparison with the Ontario results and some conclusions are presented in this paper.
    Release date: 1976-06-14
Reference (2,038)

Reference (2,038) (220 to 230 of 2,038 results)

  • Surveys and statistical programs – Documentation: 98-20-00032021004
    Description: This video is one of a series of videos related to census geography in the context of the activities of the 2021 Census and previous censuses. The objective of this video is to help users at all levels quickly understand key information derived from data with the help of powerful and dynamic tools like GeoSuite, GeoSearch and the Census Program Data Viewer.
    Release date: 2022-02-09

  • Surveys and statistical programs – Documentation: 98-20-00032021005
    Description: This video is designed to provide viewers with a basic understanding of how census concepts (e.g., focuses, population of interest and variables) are logically structured and to show different ways of looking at data. The knowledge of these concepts is used when analyzing or creating census data products.
    Release date: 2022-02-09

  • Geographic files and documentation: 12-571-X
    Description: The Standard Geographical Classification (SGC) provides a systematic structure for classifying Canada's geographic areas. It is the official classification system used for the Census of Population and other Statistics Canada surveys.

    The classification is presented in two volumes: Volume I, The Classification and Volume II, Reference Maps.

    Volume I describes the classification and related standard geographic areas and place names. It presents the names and codes for the geographical regions of Canada, provinces and territories, census divisions and census subdivisions, as well as those of the geographic regions that make up the different variants of the classification. It provides information on changes between the current version of the SGC and the previous one, including changes in name, type or code, and indicates the correspondence between the new and old codes. Volume II contains reference maps.

    Volume II. Reference Maps is available (12-572-X).
    Release date: 2022-02-09

  • Geographic files and documentation: 12-572-X
    Description: The Standard Geographical Classification (SGC) provides a systematic classification structure that categorizes all of the geographic area of Canada. The SGC is the official classification used in the Census of Population and other Statistics Canada surveys.

    The classification is organized in two volumes: Volume I, The Classification and Volume II, Reference Maps.

    Volume II contains reference maps showing boundaries, names, codes and locations of the geographic areas in the classification. The reference maps show census subdivisions, census divisions, census metropolitan areas, census agglomerations, census metropolitan influenced zones and economic regions. Definitions for these terms are found in Volume I, The Classification. Volume I describes the classification and related standard geographic areas and place names.

    The maps in Volume II can be downloaded in PDF format from our website.

    Release date: 2022-02-09

  • Geographic files and documentation: 92-142-X
    Description: This interactive mapping application facilitates the search and visualization of geographic regions in Canada for which Census of Population data are available. GeoSearch also displays geographic regions related to the selected region, as well as links to census data products, analytical products, and maps associated with that region.
    Release date: 2022-02-09

  • Geographic files and documentation: 92-143-G
    Description: This guide describes the content and applications of the product, as well as providing information on data quality, record layouts, and methodology.
    Release date: 2022-02-09

  • Geographic files and documentation: 92-146-X
    Description:

    The Census Tract Reference Maps, by Census Metropolitan Areas or Census Agglomerations cover all census metropolitan areas and the census agglomerations in the census tract program. The maps display boundaries and names of census tracts and census subdivisions, designated places and their names, as well as core, secondary core, fringe and rural areas within census metropolitan areas or census agglomerations. Inset maps are available to show detail for the more concentrated areas. The maps also display street network and other visible features such as railroads, rivers and lakes. The maps vary in scale and size. Embedded links enable users to link to respective dissemination area by census tract maps when viewing the maps on the Internet.

    A reference guide is available (92-143-G).

    Release date: 2022-02-09

  • Surveys and statistical programs – Documentation: 92-150-G
    Description: his reference guide is intended for users of the GeoSuite data package available in the Census of Population GeoSuite (92-150-X). It provides an overview of the general methodology used to create this dataset, as well as important technical information.
    Release date: 2022-02-09

  • Geographic files and documentation: 92-150-X
    Description: GeoSuite is a powerful interactive search tool based on Census of Population geographic areas. It allows users to search and retrieve data, explore and obtain information about geographic areas, and produce data tables. The information available includes the population and dwelling counts from the 2006 census to the most recent, as well as representative point coordinates, land area, geographic codes, and names.

    A reference guide is available (GeoSuite Data Package, Reference Guide, 92-150-G).
    Release date: 2022-02-09

  • Geographic files and documentation: 92-151-G
    Description:

    The reference guide provides an overview of the Geographic Attribute File product, including the general methodology used to create it.

    Release date: 2022-02-09