Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (10,770 to 10,780 of 10,894 results)

  • Articles and reports: 12-001-X198400214358
    Description:

    In response to a need for data on disabled persons in Canada, Statistics Canada undertook a program to create a disability database. This includes using supplements to the Canadian Labour Force Survey in the Fall of 1983 and the Spring of 1984, as well as including questions on the 1986 Census of Population. A general discussion of the background and content of the survey is presented. A comparison of screening methodologies conducted by Statistics Canada in November 1982 and January 1983 is presented and the results are compared.

    Release date: 1984-12-14

  • Articles and reports: 12-001-X198400114346
    Description:

    This presentation describes the important and urgent task of providing useful expressions for analytical statistics for complex sample designs. The following topics are discussed: effects of complex designs, sampling error for analytical statistics, subclasses involved in analytical statistics, comparisons of paired means, computation of analytical statistics and categorical data analysis.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114347
    Description:

    Univariate statistical models, linear regression models and generalized linear models are briefly reviewed. Examples of a two-way analysis of variance, a three-way analysis of variance and logistic regression for a three way layout are given.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114348
    Description:

    This paper proposes a modification to the method of Denton (1971) for adjusting sub-annual series to yearly totals. These totals originate from more reliable sources and constitute annual benchmarks. The benchmarked series derived according to the modified method is more parallel to the unbenchmarked series than this is the case with the original method. An additive and a proportional variant of the method are presented. These can easily be adapted for flow, stock and index series. Also presented are a few recommendations about the preliminary benchmarking of current data and the management of “historical” estimates of the series.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114349
    Description:

    Using data from the Family Expenditures Surveys over time, consumer expenditures on in-home and transportation energy from 1969 to 1982 are being studied. This article briefly summarizes some of the procedures being used to explore the data, summarize it and develop insights into shifts in consumption for policy implications purposes. With such a complex data set and such a complex, multi-faceted subject for analysis some effort must be made to reduce information flows and at the same time increase the information content of each factor of both input and output in the analyses.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114350
    Description:

    Standard chisquared (X^2) or likelihood ratio (G^2) tests for logistic regression analysis, involving a binary response variable, are adjusted to take account of the survey design. The adjustments are based on certain generalized design effects. The adjusted statistics are utilized to analyse some data from the October 1980 Canadian Labour Force Survey (LFS). The Wald statistic, which also takes the survey design into account, is also examined for goodness-of-fit of the model and for testing hypotheses on the parameters of the assumed model. Logistic regression diagnostics to detect any outlying cell proportions in the table and influential points in the factor space are applied to the LFS data, after making necessary adjustments to account for the survey design.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114351
    Description:

    Most sample surveys conducted by organizations such as Statistics Canada or the U.S. Bureau of the Census employ complex designs. The design-based approach to statistical inference, typically the institutional standard of inference for simple population statistics such as means and totals, may be extended to parameters of analytic models as well. Most of this paper focuses on application of design-based inferences to such models, but rationales are offered for use of model-based alternatives in some instances, by way of explanation for the author’s observation that both modes of inference are used in practice at his own institution.

    Within the design-based approach to inference, the paper briefly describes experience with linear regression analysis. Recently, variance computations for a number of surveys of the Census Bureau have been implemented through “replicate weighting”; the principal application has been for variances of simple statistics, but this technique also facilitates variance computation for virtually any complex analytic model. Finally, approaches and experience with log-linear models are reported.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114352
    Description:

    The paper shows different estimation methods for complex survey designs. Among others, estimation of mean, ratio and regression coefficient is presented. The standard errors are estimated by different methods: the ordinary least squares procedure, the stratified weighted sample procedure, the stratified unit weight procedure, etc. Theory of large samples and conditions to apply it are also presented.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198300214341
    Description:

    Cost models to determine an optimum allocation of the sample among stages in cluster samples are considered. Results from a proposed cost model, which directly considers the implications of follow-up visits to sample clusters as well as other travel to and from the field by data collectors, are compared with results from existing cost models. The proposed model generally calls for fewer clusters with more elements selected per cluster than the existing models.

    Release date: 1983-12-15

  • Articles and reports: 12-001-X198300214342
    Description:

    This study considers the suitability of composite estimation techniques for the Canadian Labour Force Survey. The performance of a class of AK composite estimators introduced initially by Gurney and Daly is investigated for several characteristics. While the ordinary composite estimate has a large bias, the AK composite estimate is capable of reducing the bias. Composite estimates having minimum variance and minimum mean square error are compared.

    Release date: 1983-12-15
Reference (2,038)

Reference (2,038) (520 to 530 of 2,038 results)

  • Surveys and statistical programs – Documentation: 75F0002M2011004
    Description:

    This series provides detailed documentation on income developments, including survey design issues, data quality evaluation and exploratory research for the Survey of Labour and Income Dynamics in 2009.

    Release date: 2011-10-27

  • Surveys and statistical programs – Documentation: 87-542-X
    Geography: Canada
    Description:

    This series the Canadian Framework for Culture Statistics 2011 replaces the 2004 Canadian Framework for Culture Statistics (Catalogue 81-595-MIE2004021).

    The first issue of this series presents the conceptual framework, including a definition of culture, domains and sub-domains, and criteria for their inclusion in culture. The second issue is a guide that maps the conceptual framework to selected standard classification systems. It is intended to foster a standard approach to the measurement of culture in Canada.

    Release date: 2011-10-24

  • Surveys and statistical programs – Documentation: 87-542-X2011001
    Geography: Canada
    Description:

    The first issue of the series presents the Conceptual Framework for Culture Statistics 2011, a revision of the 2004 Canadian Framework for Culture Statistics.

    The conceptual framework contains an official statistical definition of culture and describes a set of culture domains that can be used to measure culture from creation to use.

    Release date: 2011-10-24

  • Surveys and statistical programs – Documentation: 87-542-X2011002
    Geography: Canada
    Description:

    The second issue of this series is a companion piece to the Conceptual Framework for Culture Statistics 2011, a revision to the 2004 Canadian Framework for Culture Statistics.

    The guide maps the 2011 Canadian framework for culture statistics to the following Statistics Canada's standard classification systems: the North American Industry Classification System (NAICS) 2007, the North American Product Classification System (NAPCS) - Canada (Provisional Version 0.1), National Occupational Classification - Statistics (NOC-S) 2006 and Classification of Instructional Programs (CIP), Canada, 2000.

    It contains explanations, definitions and examples of how the classification codes are mapped to the conceptual framework. It also contains a series of tables that contain codes, by classification system, which help illustrate the framework domains and sub-domains, and flags those codes that do not map well to the framework.

    Release date: 2011-10-24

  • Surveys and statistical programs – Documentation: 98-300-X
    Description:

    The Preview of Products and Services offers an overview of the proposed products and services that will be released based on the 2011 Census of Population and 2011 Census of Agriculture results. Information will include a description of the products and services, 'What's new?' in comparison to 2006, levels of geography, availability/delivery methods, release timeframe and pricing.

    The preview is an Internet product, and a PDF version is available via the Internet. This product will be updated periodically as details regarding products and services become finalized.

    Release date: 2011-09-21

  • Surveys and statistical programs – Documentation: 92-144-X
    Description:

    The Preview of Census Geography Products and Services offers an overview of the proposed products and services that will be released based on the upcoming Census of Population. The geography product line includes geography concepts, enhancements and improvements to existing products, and a greater presence on the website. Reference maps and other geographic products are available in a variety of media. This document previews and highlights changes within the census geography product line.Technical limitations may result in some modifications to products described within this document. Users are encouraged to read the reference guides that accompany geography products for final product details.

    Release date: 2011-08-23

  • Geographic files and documentation: 92-153-G
    Description:

    The Postal Code Conversion File (PCCF) Reference Guide is available for the following product: Postal Code Conversion File (PCCF) (Catalogue No. 92-153-XCB). The Reference Guide describes how to use the product.

    Release date: 2011-07-20

  • Geographic files and documentation: 92F0193G
    Description:

    Most Geography products come with free reference guides that describe the content and applications of the product, as well as data quality, record layouts and other information. Reference guides are included as PDF files with the products when they are distributed. The guides are also accessible online.

    Release date: 2011-07-20

  • Notices and consultations: 13-605-X201100311491
    Description:

    This paper provides a preview of the comprehensive (historical) revision of the Canadian System National Accounts to be released beginning in June 2012. The last revision of this scope took place in 1997. The paper highlights the changes resulting from the adoption of SNA2008 which is the revised international standard for national accounting, along with statistical revisions arising from new and improved source data and methodologies. Updates to the classification systems used in the Canadian System of National Accounts are also presented along with a list of changes planned for 2014.

    Release date: 2011-06-20

  • Surveys and statistical programs – Documentation: 13-605-X201100311492
    Description:

    This note provides a brief explanation of the impact that the transition from reporting financial statements under Canadian Generally Accepted Accounting Principles (CGAAP) to the new, internationally unified financial accounting framework of the International Financial Reporting Standards (IFRS) will have on the Canadian Financial Flow Accounts and the National Balance Sheet Accounts estimates.

    Release date: 2011-06-20