Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (10,770 to 10,780 of 10,894 results)

  • Articles and reports: 12-001-X198400214358
    Description:

    In response to a need for data on disabled persons in Canada, Statistics Canada undertook a program to create a disability database. This includes using supplements to the Canadian Labour Force Survey in the Fall of 1983 and the Spring of 1984, as well as including questions on the 1986 Census of Population. A general discussion of the background and content of the survey is presented. A comparison of screening methodologies conducted by Statistics Canada in November 1982 and January 1983 is presented and the results are compared.

    Release date: 1984-12-14

  • Articles and reports: 12-001-X198400114346
    Description:

    This presentation describes the important and urgent task of providing useful expressions for analytical statistics for complex sample designs. The following topics are discussed: effects of complex designs, sampling error for analytical statistics, subclasses involved in analytical statistics, comparisons of paired means, computation of analytical statistics and categorical data analysis.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114347
    Description:

    Univariate statistical models, linear regression models and generalized linear models are briefly reviewed. Examples of a two-way analysis of variance, a three-way analysis of variance and logistic regression for a three way layout are given.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114348
    Description:

    This paper proposes a modification to the method of Denton (1971) for adjusting sub-annual series to yearly totals. These totals originate from more reliable sources and constitute annual benchmarks. The benchmarked series derived according to the modified method is more parallel to the unbenchmarked series than this is the case with the original method. An additive and a proportional variant of the method are presented. These can easily be adapted for flow, stock and index series. Also presented are a few recommendations about the preliminary benchmarking of current data and the management of “historical” estimates of the series.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114349
    Description:

    Using data from the Family Expenditures Surveys over time, consumer expenditures on in-home and transportation energy from 1969 to 1982 are being studied. This article briefly summarizes some of the procedures being used to explore the data, summarize it and develop insights into shifts in consumption for policy implications purposes. With such a complex data set and such a complex, multi-faceted subject for analysis some effort must be made to reduce information flows and at the same time increase the information content of each factor of both input and output in the analyses.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114350
    Description:

    Standard chisquared (X^2) or likelihood ratio (G^2) tests for logistic regression analysis, involving a binary response variable, are adjusted to take account of the survey design. The adjustments are based on certain generalized design effects. The adjusted statistics are utilized to analyse some data from the October 1980 Canadian Labour Force Survey (LFS). The Wald statistic, which also takes the survey design into account, is also examined for goodness-of-fit of the model and for testing hypotheses on the parameters of the assumed model. Logistic regression diagnostics to detect any outlying cell proportions in the table and influential points in the factor space are applied to the LFS data, after making necessary adjustments to account for the survey design.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114351
    Description:

    Most sample surveys conducted by organizations such as Statistics Canada or the U.S. Bureau of the Census employ complex designs. The design-based approach to statistical inference, typically the institutional standard of inference for simple population statistics such as means and totals, may be extended to parameters of analytic models as well. Most of this paper focuses on application of design-based inferences to such models, but rationales are offered for use of model-based alternatives in some instances, by way of explanation for the author’s observation that both modes of inference are used in practice at his own institution.

    Within the design-based approach to inference, the paper briefly describes experience with linear regression analysis. Recently, variance computations for a number of surveys of the Census Bureau have been implemented through “replicate weighting”; the principal application has been for variances of simple statistics, but this technique also facilitates variance computation for virtually any complex analytic model. Finally, approaches and experience with log-linear models are reported.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198400114352
    Description:

    The paper shows different estimation methods for complex survey designs. Among others, estimation of mean, ratio and regression coefficient is presented. The standard errors are estimated by different methods: the ordinary least squares procedure, the stratified weighted sample procedure, the stratified unit weight procedure, etc. Theory of large samples and conditions to apply it are also presented.

    Release date: 1984-06-15

  • Articles and reports: 12-001-X198300214341
    Description:

    Cost models to determine an optimum allocation of the sample among stages in cluster samples are considered. Results from a proposed cost model, which directly considers the implications of follow-up visits to sample clusters as well as other travel to and from the field by data collectors, are compared with results from existing cost models. The proposed model generally calls for fewer clusters with more elements selected per cluster than the existing models.

    Release date: 1983-12-15

  • Articles and reports: 12-001-X198300214342
    Description:

    This study considers the suitability of composite estimation techniques for the Canadian Labour Force Survey. The performance of a class of AK composite estimators introduced initially by Gurney and Daly is investigated for several characteristics. While the ordinary composite estimate has a large bias, the AK composite estimate is capable of reducing the bias. Composite estimates having minimum variance and minimum mean square error are compared.

    Release date: 1983-12-15
Reference (2,038)

Reference (2,038) (10 to 20 of 2,038 results)

  • Geographic files and documentation: 92-500-X
    Geography: Canada
    Description:

    This geographical file represents Canada's national road network, containing information such as street names, types, directions and address ranges.

    A reference guide is available (Road Network File, Reference Guide, 92-500-G).
    Release date: 2026-11-18

  • Geographic files and documentation: 92-637-X
    Description: This geographic file represents the census agricultural regions boundaries, for which data from the Census of Agriculture are also disseminated.

    A reference guide is available (Boundary Files, Reference Guide, 92-160-G).
    Release date: 2026-11-18

  • Notices and consultations: 92F0009X
    Description: This report provides a summary of changes to municipal boundaries, status and names. The list is usually produced on an annual basis for changes that occurred during the previous year. A five year list is produced on Census of population years.
    Release date: 2026-11-18

  • Surveys and statistical programs – Documentation: 98-304-X
    Description: The Guide to the Census of Population is a reference document that describes the various phases of the Census of Population. The guide provides an overview of content determination, sampling design, collection, data processing, data quality assessment, confidentiality guidelines and dissemination. It also includes response rates and other data quality information. This product may be useful to both new and experienced users who wish to familiarize themselves with and find specific information about the Census of Population.

    The Guide to the Census of Population combines information previously available in the Overview of the Census, National Household Survey User Guide and the Data Quality and Confidentiality Standards and Guidelines from 2011.

    Release date: 2026-11-18

  • Geographic files and documentation: 98-26-0003
    Description: This reference guide is intended for users of the Census of Population Dissemination Geographies Relationship File (98-26-0004). It provides an overview of the general methodology used to create this file, as well as important technical information.
    Release date: 2026-11-18

  • Geographic files and documentation: 98-26-0004
    Description: This file is a dissemination block-level dataset that includes correspondences to all geographic levels of the Census of Population. It is designed to be used in conjunction with the boundary files to allow for linkages between geographic areas and other levels of geography using the Dissemination Geography Unique Identifiers (DGUID).

    A reference guide is available (Dissemination Geographies Relationship File, Reference Guide, 98-26-0003).
    Release date: 2026-11-18

  • Surveys and statistical programs – Documentation: 19-20-0001
    Description: Documents in this series provide insight into the statistical methods used by Statistics Canada to produce official statistics. They include introductory material, in-depth descriptions of techniques and methods, best practices, and guidelines. All documents have undergone review to ensure that they conform to Statistics Canada's mandate and adhere to generally accepted methodological standards and practices.
    Release date: 2026-11-13

  • Surveys and statistical programs – Documentation: 19-20-00012026004
    Description: Many users of economic and social statistics rely on time series data to understand changes in socio-economic phenomena over time. This reference document presents guidelines on the main time series methods used at Statistics Canada (seasonal adjustment, revisions to seasonally adjusted data, trend-cycle estimation, benchmarking, reconciliation, temporal comparability, etc.). It is designed to complement more technical discussions of these methods found in Statistics Canada publications and reference manuals. The guidelines should be considered throughout the planning and execution phases of any project impacting the outputs of a statistical program.
    Release date: 2026-11-13

  • Notices and consultations: 89-26-0001
    Description: The Fees Report must be tabled in parliament annually, as per the Service Fees Act, which came into force in June 2017. The Service Fees Act introduces a modern legislative framework that enables cost-effective delivery of services and, through enhanced reporting to Parliament, improved transparency and oversight.
    Release date: 2026-11-09

  • Notices and consultations: 11-628-X
    Description: Departmental Results Reports (DRRs) are part of the Estimates family of documents. Estimates documents support appropriation acts, which specify the amounts and broad purposes for which funds can be spent by the government. The Estimates document family has three parts.

    Part I (Government Expenditure Plan) provides an overview of federal spending.

    Part II (Main Estimates) lists the financial resources required by individual departments, agencies and Crown corporations for the upcoming fiscal year.

    Part III (Departmental Expenditure Plans) consists of two documents. Departmental Plans (DPs) are expenditure plans for each appropriated department and agency (excluding Crown corporations).

    Release date: 2026-11-06