Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (100 to 110 of 13,366 results)

Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (400 to 410 of 2,038 results)

  • Surveys and statistical programs – Documentation: 81-582-X2016001
    Description:

    The Pan-Canadian Education Indicators Program (PCEIP) draws from a wide variety of data sources to provide information on the school-age population, elementary, secondary and postsecondary education, transitions, and labour market outcomes. PCEIP products include tables, fact sheets, reports and a methodological handbook. They present indicators for all of Canada, the provinces, the territories, as well as selected international comparisons and comparisons over time. The Pan-Canadian Education Indicators Program (PCEIP) is an ongoing initiative of the Canadian Education Statistics Council, a partnership between Statistics Canada and the Council of Ministers of Education, Canada that provides a set of statistical measures on education systems in Canada.

    Release date: 2016-06-21

  • Surveys and statistical programs – Documentation: 13-606-G201600114616
    Description:

    An introduction and overview of the Canadian System of Macroeconomic Accounts.

    Release date: 2016-05-31

  • Surveys and statistical programs – Documentation: 13-606-G201600114618
    Description:

    An explanation of key national accounting concepts involving stocks and flows; the distinction between price and volume changes; production, distribution, consumption and accumulation; residence; institutional units and sectors; classifications; and accounting concepts. Also includes a description of SNA 2008’s sequence of accounts.

    Release date: 2016-05-31

  • Surveys and statistical programs – Documentation: 13-606-G201600114619
    Description:

    An explanation of the structure and concepts of Canada’s supply and use accounts.

    Release date: 2016-05-31

  • Surveys and statistical programs – Documentation: 13-607-X
    Description: The Methodological Guide: Canadian System of Macroeconomic Accounts provides readers with information on macroeconomic accounts at Statistics Canada. It provides links to produced data and publications and describes the concepts, sources, and methods used to compile them. Topics include gross domestic product, national economic accounts (incomes, expenditures, savings, capital formation, financial flows and balance sheet accounts), supply and use tables, provincial and territorial economic accounts, productivity, balance of payments, international investment position and government finance statistics.

    This user's guide has been developed by the Macroeconomic Accounts Program to facilitate access to macroeconomic accounting information throughout Statistics Canada and to explain its linkage with international standards, such as the System of National Accounts, 2008. This guide is continually being updated to maintain its relevance.

    Release date: 2016-05-31

  • Surveys and statistical programs – Documentation: 16-509-X
    Description: The Methodological Guide: Canadian System of Environmental-Economic Accounting provides readers with information on environmental-economic accounts at Statistics Canada. It provides links to produced data and publications and describes the concepts, sources, and methods used to compile them. Topics include ecosystem accounting, asset accounts (natural resources in physical and monetary terms), physical flow accounts (energy and water use, and waste and greenhouse gas emissions), environmental activity statistics (expenditures on environmental protection), and the applications and extensions of those accounts (attribution of physical flows to final demand and intensity measures).

    This user's guide has been developed by the Environmental Statistics Program to facilitate access to environmental-economic accounting information throughout Statistics Canada and to explain its linkage with international standards, the United Nations System of Environmental-Economic Accounting. This guide is continually being updated to maintain its relevance.

    Release date: 2016-04-22

  • Notices and consultations: 92-140-X
    Description:

    Before each Census of Population, Statistics Canada carries out a three- to four-year process to review the content of the census questionnaires in consultation with census data users, performing tests and developing questionnaire content to ensure that it takes into account the evolution of Canadian society. Factors considered in developing the content include legislative requirements regarding information, program and policy requirements; the burden placed on respondents to respond to questions; concerns about privacy; feedback from consultations and tests; data quality; costs and operational considerations; the comparability of data with earlier data and the availability of alternative data sources. Before each census, Statistics Canada tests the questionnaire content through an extensive test. The content report presents the analyses conducted from the data collected from this test and the results that are used to fine tune the questionnaires, the methodology and the systems used for the Census Program.

    Release date: 2016-04-01

  • Notices and consultations: 92-140-X2016001
    Description:

    The 2016 Census Program Content Test was conducted from May 2 to June 30, 2014. The Test was designed to assess the impact of any proposed content changes to the 2016 Census Program and to measure the impact of including a social insurance number (SIN) question on the data quality.

    This quantitative test used a split-panel design involving 55,000 dwellings, divided into 11 panels of 5,000 dwellings each: five panels were dedicated to the Content Test while the remaining six panels were for the SIN Test. Two models of test questionnaires were developed to meet the objectives, namely a model with all the proposed changes EXCEPT the SIN question and a model with all the proposed changes INCLUDING the SIN question. A third model of 'control' questionnaire with the 2011 content was also developed. The population living in a private dwelling in mail-out areas in one of the ten provinces was targeted for the test. Paper and electronic response channels were part of the Test as well.

    This report presents the Test objectives, the design and a summary of the analysis in order to determine potential content for the 2016 Census Program. Results from the data analysis of the Test were not the only elements used to determine the content for 2016. Other elements were also considered, such as response burden, comparison over time and users’ needs.

    Release date: 2016-04-01

  • Surveys and statistical programs – Documentation: 72-210-G
    Description: The Guide to Job Vacancy Statistics provides an overview of the structure of the survey and covers topics such as survey methodology, data quality as well as terms and definitions.
    Release date: 2016-03-31

  • Surveys and statistical programs – Documentation: 11-522-X201700014706
    Description:

    Over the last decade, Statistics Canada’s Producer Prices Division has expanded its service producer price indexes program and continued to improve its goods and construction producer price indexes program. While the majority of price indexes are based on traditional survey methods, efforts were made to increase the use of administrative data and alternative data sources in order to reduce burden on our respondents. This paper focuses mainly on producer price programs, but also provides information on the growing importance of alternative data sources at Statistics Canada. In addition, it presents the operational challenges and risks that statistical offices could face when relying more and more on third-party outputs. Finally, it presents the tools being developed to integrate alternative data while collecting metadata.

    Release date: 2016-03-24