Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,370 to 12,380 of 13,366 results)

  • Table: 16-10-0070-01
    Frequency: Quarterly
    Description: This table contains 11 series, with data for years 1946 - 1994 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Production and stocks (11 items: Cereals ready to serve; Macaroni, et cetera, dry; Prepared cake mixes; Mixes, all other flour based; ...).
    Release date: 2000-02-19

  • Table: 16-10-0093-01
    Frequency: Quarterly
    Description: This table contains 7 series, with data for years 1946 - 1989 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Standard Classification of Goods (SCG) (7 items: Biscuits, soda; Biscuits, plain and fancy; Chewing gum; Cocoa powder; ...).
    Release date: 2000-02-19

  • Table: 22-10-0092-01
    Frequency: Monthly
    Description: Telephone statistics, by telephone operations for Canada from 1971 to 1998. (Terminated)
    Release date: 2000-02-19

  • Table: 12-10-0079-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 8 series, with data for years 1946 - 1975 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of index (2 items: Index of prices; Index of physical volume); Index base period (2 items: 1948=100; 1968=100); Imports/exports (2 items: Imports; Exports).

    Release date: 2000-02-19

  • Table: 32-10-0278-01
    Frequency: Annual
    Description: This table contains 493 series, with data for years 1926 - 1972 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (10 items: Canada;Prince Edward Island;Nova Scotia;New Brunswick; ...); Expenses and rebates (51 items: Total operating expenses;Taxes on owned farm land;Gross farm rent;Cash rent; ...).
    Release date: 2000-02-19

  • 12,376. Farm wages Archived
    Table: 32-10-0281-01
    Frequency: Quarterly
    Description: This table contains 48 series, with data for years 1940 - 1986 (not all combinations necessarily have data for all years), and is no longer being released. This table contains data described by the following dimensions (Not all combinations are available): Geography (8 items: Canada;Maritime provinces;Quebec;Ontario; ...); Farm wage rates (3 items: Monthly farm wages;Hourly farm wages;Daily farm wages); Components (2 items: With board;Without board).
    Release date: 2000-02-19

  • Table: 23-10-0093-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 9 series, with data for years 1946 - 1995 (not all combinations necessarily have data for all years), and was last released on 2000-10-20. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada), Operating statistics (9 items: Railway revenues; Railway operating expenses; Railway operating income;Railway operating revenue; passenger; ...).

    Release date: 2000-02-19

  • Table: 23-10-0203-01
    Geography: Canada
    Frequency: Monthly
    Description:

    This table contains 16 series, with data for years 1975 - 1994 (not all combinations necessarily have data for all years), and was last released on 2000-05-25. This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada), Operating statistics (16 items: Carriers reporting; Revenue earned, all services; Revenue earned, intercity and rural services; Revenue earned, urban-suburban services; ...).

    Release date: 2000-02-19

  • Table: 36-10-0384-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 159 series, with data for years 1946 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (159 items: Real domestic product; Agriculture; Forestry; Real domestic product less agriculture ...).
    Release date: 2000-02-19

  • Table: 36-10-0386-01
    Geography: Canada
    Frequency: Annual
    Description: This table contains 189 series, with data for years 1919 - 1971 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 items: Canada ...) Industry (189 items: Index of industrial production; Mines (including milling); quarries and oil wells; Metal mines; Placer gold and gold quartz mines ...).
    Release date: 2000-02-19
Analysis (10,894)

Analysis (10,894) (2,480 to 2,490 of 10,894 results)

  • Articles and reports: 12-001-X202100100004
    Description: Multiple data sources are becoming increasingly available for statistical analyses in the era of big data. As an important example in finite-population inference, we consider an imputation approach to combining data from a probability survey and big found data. We focus on the case when the study variable is observed in the big data only, but the other auxiliary variables are commonly observed in both data. Unlike the usual imputation for missing data analysis, we create imputed values for all units in the probability sample. Such mass imputation is attractive in the context of survey data integration (Kim and Rao, 2012). We extend mass imputation as a tool for data integration of survey data and big non-survey data. The mass imputation methods and their statistical properties are presented. The matching estimator of Rivers (2007) is also covered as a special case. Variance estimation with mass-imputed data is discussed. The simulation results demonstrate the proposed estimators outperform existing competitors in terms of robustness and efficiency.
    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100005
    Description:

    Bayesian pooling strategies are used to solve precision problems related to statistical analyses of data from small areas. In such cases, the subpopulation samples are usually small, even though the population might not be. As an alternative, similar data can be pooled in order to reduce the number of parameters in the model. Many surveys consist of categorical data on each area, collected into a contingency table. We consider hierarchical Bayesian pooling models with a Dirichlet process prior for analyzing categorical data based on small areas. However, the prior used to pool such data frequently results in an overshrinkage problem. To mitigate for this problem, the parameters are separated into global and local effects. This study focuses on data pooling using a Dirichlet process prior. We compare the pooling models using bone mineral density (BMD) data taken from the Third National Health and Nutrition Examination Survey for the period 1988 to 1994 in the United States. Our analyses of the BMD data are performed using a Gibbs sampler and slice sampling to carry out the posterior computations.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100006
    Description:

    It is now possible to manage surveys using statistical models and other tools that can be applied in real time. This paper focuses on three developments that reflect the attempt to take a more scientific approach to the management of survey field work: 1) the use of responsive and adaptive designs to reduce nonresponse bias, other sources of error, or costs; 2) optimal routing of interviewer travel to reduce costs; and 3) rapid feedback to interviewers to reduce measurement error. The article begins by reviewing experiments and simulation studies examining the effectiveness of responsive and adaptive designs. These studies suggest that these designs can produce modest gains in the representativeness of survey samples or modest cost savings, but can also backfire. The next section of the paper examines efforts to provide interviewers with a recommended route for their next trip to the field. The aim is to bring interviewers’ field work into closer alignment with research priorities while reducing travel time. However, a study testing this strategy found that interviewers often ignore such instructions. Then, the paper describes attempts to give rapid feedback to interviewers, based on automated recordings of their interviews. Interviewers often read questions in ways that affect respondents’ answers; correcting these problems quickly yielded marked improvements in data quality. All of the methods are efforts to replace the judgment of interviewers, field supervisors, and survey managers with statistical models and scientific findings.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100007
    Description:

    We consider the estimation of a small area mean under the basic unit-level model. The sum of the resulting model-dependent estimators may not add up to estimates obtained with a direct survey estimator that is deemed to be accurate for the union of these small areas. Benchmarking forces the model-based estimators to agree with the direct estimator at the aggregated area level. The generalized regression estimator is the direct estimator that we benchmark to. In this paper we compare small area benchmarked estimators based on four procedures. The first procedure produces benchmarked estimators by ratio adjustment. The second procedure is based on the empirical best linear unbiased estimator obtained under the unit-level model augmented with a suitable variable that ensures benchmarking. The third procedure uses pseudo-empirical estimators constructed with suitably chosen sampling weights so that, when aggregated, they agree with the reliable direct estimator for the larger area. The fourth procedure produces benchmarked estimators that are the result of a minimization problem subject to the constraint given by the benchmark condition. These benchmark procedures are applied to the small area estimators when the sampling rates are non-negligible. The resulting benchmarked estimators are compared in terms of relative bias and mean squared error using both a design-based simulation study as well as an example with real survey data.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100008
    Description:

    Changes in the design of a repeated survey generally result in systematic effects in the sample estimates, which are further referred to as discontinuities. To avoid confounding real period-to-period change with the effects of a redesign, discontinuities are often quantified by conducting the old and the new design in parallel for some period of time. Sample sizes of such parallel runs are generally too small to apply direct estimators for domain discontinuities. A bivariate hierarchical Bayesian Fay-Herriot (FH) model is proposed to obtain more precise predictions for domain discontinuities and is applied to a redesign of the Dutch Crime Victimization Survey. This method is compared with a univariate FH model where the direct estimates under the regular approach are used as covariates in a FH model for the alternative approach conducted on a reduced sample size and a univariate FH model where the direct estimates for the discontinuities are modeled directly. An adjusted step forward selection procedure is proposed that minimizes the WAIC until the reduction of the WAIC is smaller than the standard error of this criteria. With this approach more parsimonious models are selected, which prevents selecting complex models that tend to overfit the data.

    Release date: 2021-06-24

  • Articles and reports: 12-001-X202100100009
    Description: Predictive mean matching is a commonly used imputation procedure for addressing the problem of item nonresponse in surveys. The customary approach relies upon the specification of a single outcome regression model. In this note, we propose a novel predictive mean matching procedure that allows the user to specify multiple outcome regression models. The resulting estimator is multiply robust in the sense that it remains consistent if one of the specified outcome regression models is correctly specified. The results from a simulation study suggest that the proposed method performs well in terms of bias and efficiency.
    Release date: 2021-06-24

  • Stats in brief: 45-28-0001202100100027
    Description:

    The COVID-19 pandemic has significantly impacted the behaviours of Canadians, particularly regarding their online activities. Using data from the 2020 Canadian Internet Use Survey, this article examines several Internet-related activities Canadians have done more often during the pandemic.

    Release date: 2021-06-24

  • Stats in brief: 11-627-M2021041
    Description:

    This infographic features the pathways of registered apprentices across Canada. It presents the certification, continuation and discontinuation rates of registered apprentices over time as well as key results among 25 selected Red Seal trades, and 5 selected non-Red Seal trades.

    Release date: 2021-06-24

  • Articles and reports: 36-28-0001202100600001
    Description:

    This article provides an integrated summary of key changes in economic and labour market activity since the onset of the pandemic.

    Release date: 2021-06-23

  • Articles and reports: 36-28-0001202100600002
    Description: International students are increasingly viewed as a promising pool of skilled individuals who can be tapped for participation in the Canadian labour market. This is a key motivating factor for providing international students with pathways to obtain permanent residency. This article documents the share of international students who became landed immigrants across various sociodemographic characteristics.
    Release date: 2021-06-23
Reference (2,038)

Reference (2,038) (10 to 20 of 2,038 results)

  • Geographic files and documentation: 92-500-X
    Geography: Canada
    Description:

    This geographical file represents Canada's national road network, containing information such as street names, types, directions and address ranges.

    A reference guide is available (Road Network File, Reference Guide, 92-500-G).
    Release date: 2026-11-18

  • Geographic files and documentation: 92-637-X
    Description: This geographic file represents the census agricultural regions boundaries, for which data from the Census of Agriculture are also disseminated.

    A reference guide is available (Boundary Files, Reference Guide, 92-160-G).
    Release date: 2026-11-18

  • Notices and consultations: 92F0009X
    Description: This report provides a summary of changes to municipal boundaries, status and names. The list is usually produced on an annual basis for changes that occurred during the previous year. A five year list is produced on Census of population years.
    Release date: 2026-11-18

  • Surveys and statistical programs – Documentation: 98-304-X
    Description: The Guide to the Census of Population is a reference document that describes the various phases of the Census of Population. The guide provides an overview of content determination, sampling design, collection, data processing, data quality assessment, confidentiality guidelines and dissemination. It also includes response rates and other data quality information. This product may be useful to both new and experienced users who wish to familiarize themselves with and find specific information about the Census of Population.

    The Guide to the Census of Population combines information previously available in the Overview of the Census, National Household Survey User Guide and the Data Quality and Confidentiality Standards and Guidelines from 2011.

    Release date: 2026-11-18

  • Geographic files and documentation: 98-26-0003
    Description: This reference guide is intended for users of the Census of Population Dissemination Geographies Relationship File (98-26-0004). It provides an overview of the general methodology used to create this file, as well as important technical information.
    Release date: 2026-11-18

  • Geographic files and documentation: 98-26-0004
    Description: This file is a dissemination block-level dataset that includes correspondences to all geographic levels of the Census of Population. It is designed to be used in conjunction with the boundary files to allow for linkages between geographic areas and other levels of geography using the Dissemination Geography Unique Identifiers (DGUID).

    A reference guide is available (Dissemination Geographies Relationship File, Reference Guide, 98-26-0003).
    Release date: 2026-11-18

  • Surveys and statistical programs – Documentation: 19-20-0001
    Description: Documents in this series provide insight into the statistical methods used by Statistics Canada to produce official statistics. They include introductory material, in-depth descriptions of techniques and methods, best practices, and guidelines. All documents have undergone review to ensure that they conform to Statistics Canada's mandate and adhere to generally accepted methodological standards and practices.
    Release date: 2026-11-13

  • Surveys and statistical programs – Documentation: 19-20-00012026004
    Description: Many users of economic and social statistics rely on time series data to understand changes in socio-economic phenomena over time. This reference document presents guidelines on the main time series methods used at Statistics Canada (seasonal adjustment, revisions to seasonally adjusted data, trend-cycle estimation, benchmarking, reconciliation, temporal comparability, etc.). It is designed to complement more technical discussions of these methods found in Statistics Canada publications and reference manuals. The guidelines should be considered throughout the planning and execution phases of any project impacting the outputs of a statistical program.
    Release date: 2026-11-13

  • Notices and consultations: 89-26-0001
    Description: The Fees Report must be tabled in parliament annually, as per the Service Fees Act, which came into force in June 2017. The Service Fees Act introduces a modern legislative framework that enables cost-effective delivery of services and, through enhanced reporting to Parliament, improved transparency and oversight.
    Release date: 2026-11-09

  • Notices and consultations: 11-628-X
    Description: Departmental Results Reports (DRRs) are part of the Estimates family of documents. Estimates documents support appropriation acts, which specify the amounts and broad purposes for which funds can be spent by the government. The Estimates document family has three parts.

    Part I (Government Expenditure Plan) provides an overview of federal spending.

    Part II (Main Estimates) lists the financial resources required by individual departments, agencies and Crown corporations for the upcoming fiscal year.

    Part III (Departmental Expenditure Plans) consists of two documents. Departmental Plans (DPs) are expenditure plans for each appropriated department and agency (excluding Crown corporations).

    Release date: 2026-11-06