Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (10 to 20 of 13,366 results)

Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (450 to 460 of 2,038 results)

  • Notices and consultations: 11-017-X
    Description: Statistics Canada's Newsletter for Small and Medium-sized Businesses offers information to the business community about Statistics Canada's data and services. The newsletter also offers links to data releases of the Census and National Household Survey, videos, tutorials, media advisories, learning sessions and presentations.
    Release date: 2014-11-20

  • Surveys and statistical programs – Documentation: 13-605-X201400514088
    Description:

    An overview of the Canadian Government Finance Statistics (CGFS) framework; how it relates to other government statistics such as the Canadian System of Macroeconomic Accounts and the Public Accounts; and the new GFS data products available to users

    Release date: 2014-11-07

  • Notices and consultations: 13-605-X201400414107
    Description:

    Beginning in November 2014, International Trade in goods data will be provided on a Balance of Payments (BOP) basis for additional country detail. In publishing this data, BOP-based exports to and imports from 27 countries, referred to as Canada’s Principal Trading Partners (PTPs), will be highlighted for the first time. BOP-based trade in goods data will be available for countries such as China and Mexico, Brazil and India, South Korea, and our largest European Union trading partners, in response to substantial demand for information on these countries in recent years. Until now, Canada’s geographical trading patterns have been examined almost exclusively through analysis of Customs-based trade data. Moreover, BOP trade in goods data for these countries will be available alongside the now quarterly Trade in Services data as well as annual Foreign Direct Investment data for many of these Principal Trading Partners, facilitating country-level international trade and investment analysis using fully comparable data. The objective of this article is to introduce these new measures. This note will first walk users through the key BOP concepts, most importantly the concept of change in ownership. This will serve to familiarize analysts with the Balance of Payments framework for analyzing country-level data, in contrast to Customs-based trade data. Second, some preliminary analysis will be reviewed to illustrate the concepts, with provisional estimates for BOP-based trade with China serving as the principal example. Lastly, we will outline the expansion of quarterly trade in services to generate new estimates of trade for the PTPs and discuss future work in trade statistics.

    Release date: 2014-11-04

  • Surveys and statistical programs – Documentation: 11-522-X201300014258
    Description:

    The National Fuel Consumption Survey (FCS) was created in 2013 and is a quarterly survey that is designed to analyze distance driven and fuel consumption for passenger cars and other vehicles weighing less than 4,500 kilograms. The sampling frame consists of vehicles extracted from the vehicle registration files, which are maintained by provincial ministries. For collection, FCS uses car chips for a part of the sampled units to collect information about the trips and the fuel consumed. There are numerous advantages to using this new technology, for example, reduction in response burden, collection costs and effects on data quality. For the quarters in 2013, the sampled units were surveyed 95% via paper questionnaires and 5% with car chips, and in Q1 2014, 40% of sampled units were surveyed with car chips. This study outlines the methodology of the survey process, examines the advantages and challenges in processing and imputation for the two collection modes, presents some initial results and concludes with a summary of the lessons learned.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014259
    Description:

    In an effort to reduce response burden on farm operators, Statistics Canada is studying alternative approaches to telephone surveys for producing field crop estimates. One option is to publish harvested area and yield estimates in September as is currently done, but to calculate them using models based on satellite and weather data, and data from the July telephone survey. However before adopting such an approach, a method must be found which produces estimates with a sufficient level of accuracy. Research is taking place to investigate different possibilities. Initial research results and issues to consider are discussed in this paper.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014260
    Description: The Survey of Employment, Payrolls and Hours (SEPH) produces monthly estimates and determines the month-to-month changes for variables such as employment, earnings and hours at detailed industrial levels for Canada, the provinces and territories. In order to improve the efficiency of collection activities for this survey, an electronic questionnaire (EQ) was introduced in the fall of 2012. Given the timeframe allowed for this transition as well as the production calendar of the survey, a conversion strategy was developed for the integration of this new mode. The goal of the strategy was to ensure a good adaptation of the collection environment and also to allow the implementation of a plan of analysis that would evaluate the impact of this change on the results of the survey. This paper will give an overview of the conversion strategy, the different adjustments that were made during the transition period and the results of various evaluations that were conducted. For example, the impact of the integration of the EQ on the collection process, the response rate and the follow-up rate will be presented. In addition, the effect that this new collection mode has on the survey estimates will also be discussed. More specifically, the results of a randomized experiment that was conducted in order to determine the presence of a mode effect will be presented.
    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014269
    Description:

    The Census Overcoverage Study (COS) is a critical post-census coverage measurement study. Its main objective is to produce estimates of the number of people erroneously enumerated, by province and territory, study the characteristics of individuals counted multiple times and identify possible reasons for the errors. The COS is based on the sampling and clerical review of groups of connected records that are built by linking the census response database to an administrative frame, and to itself. In this paper we describe the new 2011 COS methodology. This methodology has incorporated numerous improvements including a greater use of probabilistic record-linkage, the estimation of linking parameters with an Expectation-Maximization (E-M) algorithm, and the efficient use of household information to detect more overcoverage cases.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014278
    Description:

    In January and February 2014, Statistics Canada conducted a test aiming at measuring the effectiveness of different collection strategies using an online self-reporting survey. Sampled units were contacted using mailed introductory letters and asked to complete the online survey without any interviewer contact. The objectives of this test were to measure the take-up rates for completing an online survey, and to profile the respondents/non-respondents. Different samples and letters were tested to determine the relative effectiveness of the different approaches. The results of this project will be used to inform various social surveys that are preparing to include an internet response option in their surveys. The paper will present the general methodology of the test as well as results observed from collection and the analysis of profiles.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014285
    Description:

    The 2011 National Household Survey (NHS) is a voluntary survey that replaced the traditional mandatory long-form questionnaire of the Canadian census of population. The NHS sampled about 30% of Canadian households and achieved a design-weighted response rate of 77%. In comparison, the last census long form was sent to 20% of households and achieved a response rate of 94%. Based on the long-form data, Statistics Canada traditionally produces two public use microdata files (PUMFs): the individual PUMF and the hierarchical PUMF. Both give information on individuals, but the hierarchical PUMF provides extra information on the household and family relationships between the individuals. To produce two PUMFs, based on the NHS data, that cover the whole country evenly and that do not overlap, we applied a special sub-sampling strategy. Difficulties in the confidentiality analyses have increased because of the numerous new variables, the more detailed geographic information and the voluntary nature of the NHS. This paper describes the 2011 PUMF methodology and how it balances the requirements for more information and for low risk of disclosure.

    Release date: 2014-10-31

  • Surveys and statistical programs – Documentation: 11-522-X201300014290
    Description:

    This paper describes a new module that will project families and households by Aboriginal status using the Demosim microsimulation model. The methodology being considered would assign a household/family headship status annually to each individual and would use the headship rate method to calculate the number of annual families and households by various characteristics and geographies associated with Aboriginal populations.

    Release date: 2014-10-31