Keyword search

Filter results by

Search Help
Currently selected filters that can be removed

Keyword(s)

Survey or statistical program

738 facets displayed. 0 facets selected.

Content

1 facets displayed. 0 facets selected.
Sort Help
entries

Results

All (26,768)

All (26,768) (0 to 10 of 26,768 results)

  • Table: 33-10-0036-01
    Geography: Canada
    Frequency: Daily
    Description:

    This table contains 27 series, with data starting from 1981 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Geography (1 item: Canada); Type of currency (27 items: Australian dollar, daily average; Brazilian real, daily average; Chinese renminbi, daily average; European euro, daily average; ...).

    Release date: 2026-11-20

  • Table: 16-10-0019-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents production variables for metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0019-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents production variables for non-metallic minerals from the mining industry in Canada. The variables available are the quantity produced, the quantity shipped and the closing inventories. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0020-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-01
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: This table presents the value of shipments for metallic and non-metallic minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 16-10-0021-02
    Geography: Canada, Geographical region of Canada, Province or territory
    Frequency: Monthly
    Description: The table presents the value of shipments for critical minerals from the mining industry in Canada. The data are published at the national, provincial and territorial levels.
    Release date: 2026-11-20

  • Table: 20-10-0056-01
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail trade, sales, Canada, provinces, territories and specific Census Metropolitan Areas based on the North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-02
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, sales by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20

  • Table: 20-10-0056-03
    Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part
    Frequency: Monthly
    Description:

    Retail Trade, e-commerce sales, Canada, by industries based on North American Industry Classification System (NAICS), monthly.

    Release date: 2026-11-20
Data (13,366)

Data (13,366) (12,430 to 12,440 of 13,366 results)

  • Table: 11-516-X198300111304
    Description:

    The statistics presented in this section are in three major divisions. The first of these, series G1-151, cover private and official estimates of the balance of payments on current and capital account from 1900 to 1975. This subsection is itself divided into three parts: series G1-56 contain the estimates of the balance of payments of Professors Jacob Viner and Frank Knox for the period 1900 to 1926; series G57-83 contain the official estimates of the balance of payments, current account, prepared by Statistics Canada (formerly Dominion Bureau of Statistics) for the period 1926 to 1975; series G84-152 contain the official estimates of the balance of payments, capital account for 1926 to 1975.

    Release date: 1999-07-29

  • Table: 11-516-X198300111305
    Description:

    The data contained in this section for the most part relate only to the revenues, expenditures and debt of the federal, provincial and municipal governments proper. The first part of the chapter contains information on the finances of the federal government from Confederation to 1975. The second part contains information on the finances of all governments for various years since 1933 to 1975. The final part of the chapter contains miscellaneous data relating to various aspects of governmental finance.

    Release date: 1999-07-29

  • Table: 11-516-X198300111306
    Description:

    The data of this section are presented in six groups as follows: the supply of money, series J1-54; central banking, series J55-74; chartered banking, series J75-272; other financial institutions, series J273-470; issues of stocks and bonds, yields and exchange rates, series J471-567; and year-end financial assets and liabilities according to the financial flow accounts, series J568-875.

    Release date: 1999-07-29

  • Table: 11-516-X198300111307
    Description:

    The price indexes presented herein have been grouped into seven subsections, namely: (1) consumer price indexes, series K1-32, (2) wholesale price indexes, series K33-55, (3) export and import price indexes, series K56-67, (4) industry selling price indexes, series K68-107, (5) construction price statistics, series K108-159, (6) fixed capital stocks implicit price indexes, series K160-171, and (7) implicit price indexes of gross national expenditures, series K172-183.

    Release date: 1999-07-29

  • Table: 11-516-X198300111308
    Description: This section is concerned with those statistics referring to the allocation of lands and the production of forests. To some extent, these two questions are compatible only in that they have fallen under the same administrative unit for the purposes of management and data collection. They continue together in this volume as a matter of convenience. The data relating to land refer to the allocation of lands for settlement, production and recreation, and are, wherever possible, reported at both the national and provincial level. Those data relating to forests are concerned with primary products, the manufacturing of lumber, pulp and paper, and exports. Sources, together with problems or qualifications associated with them, are identified in each table by footnotes.
    Release date: 1999-07-29

  • Table: 11-516-X198300111309
    Description:

    The statistics of agriculture presented here are in five sections. Series Ml-248 are the general statistics of the industry, covering such topics as farm population, area of farms, capital employed, cash income and prices of farm products. Series M249-309 are crop statistics, showing acreage, production and value of the various crops. Series M310-412 are livestock statistics, showing number and value of livestock on farms as well as production and disposition of various livestock products. Series M413-489 show exports and domestic disappearance of grains, animals and animal products, and food produced and consumed, per capita. Series M490-525 are miscellaneous statistics such as sales through marketing boards and purchases through co-operatives and farm implement and fertilizer sales.

    Release date: 1999-07-29

  • Table: 11-516-X198300111310
    Description:

    Statistics of Canadian production and trade in fish are presented in four parts: primary operations (series N1-48), processing (series N49-82), value of exports and imports (series N83-113), and miscellaneous statistics (series N114-142).

    Release date: 1999-07-29

  • Table: 11-516-X198300111311
    Description:

    This section includes production, exports and imports of metallic and non-metallic minerals, the latter category including structural materials but excluding fuels, which are reported in the Energy chapter, Section Q. The section contains three parts: metallic minerals, series P1-81; non-metallic minerals, series P82-150; and principal statistics, series P151-162. The first two parts contain quantities and value of production, exports and imports; the third part contains number of employees, salaries and wages, cost of fuel and electricity, cost of process supplies and containers, gross value of production and net value added by processing.

    Release date: 1999-07-29

  • Table: 11-516-X198300111313
    Description:

    This section contains the major statistics pertaining to the energy-producing and energy-distributing industries in Canada. These statistics are collected and maintained by Statistics Canada using a classification based on nature of the resource base and level of activity, rather than the end-use classification that has been adopted here. In the previous edition, portions of the material which appears here appeared in Section N, Minerals and Fuel, others appeared in Section P, Electric Power.

    Release date: 1999-07-29

  • Table: 11-516-X198300111314
    Description:

    This section updates the official statistics on manufactures for 1870 to 1959 presented in the first edition of Historical Statistics of Canada. Apart from minor revision to some series for the years 1952 to 1959, no revisions have been made to the statistics from 1870 to 1959. The descriptions of the statistics for this period have been reproduced without change from the description in the first edition written by Arthur J.R. Smith.

    Release date: 1999-07-29
Analysis (10,894)

Analysis (10,894) (10,690 to 10,700 of 10,894 results)

  • Articles and reports: 12-001-X198800214586
    Description:

    A generalized implementation of a method for performing automated coding is described. Traditionally, coding has been performed manually by specially trained personnel, but recently computerized systems have appeared which either eliminate or substantially reduce the need for manual coding. Typically, such systems are limited in use to those applications for which they were originally designed. The system presented here may be used by any application to perform coding of English or French text using any classification scheme.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214587
    Description:

    The QUID system, which was designed and developed by INSEE (Paris) Institut National de la Statistique et des Études Économiques- National Statistics and Economic Studies Institute, is an automatic coding system for survey data collected in the form of literal headings expressed in the terminology of the respondent. The system hinges on the use of a very wide knowledge base made up of real phrases coded by experts. This study deals primarily with the preliminary automatic standardization processing of the phrases, and then with the algorithm used to organize the phrase base into an optimized tree pattern. A sorting example is provided in the form of an illustration. At present, the processing of additional coding variables used to complement the information contained in the phrases presents certain difficulties, and these will be examined in detail. The QUID 2 project, an updated version of the system, will be discussed briefly.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214588
    Description:

    Suppose that undercount rates in a census have been estimated and that block-level estimates of the undercount have been computed. It may then be desirable to create a new roster of households incorporating the estimated omissions. It is proposed here that such a roster be created by weighting the enumerated households. The household weights are constrained by linear equations representing the desired total counts of persons in each estimation class and the desired total count of households. Weights are then calculated that satisfy the constraints while making the fitted table as close as possible to the raw data. The procedure may be regarded as an extension of the standard “raking” methodology to situations where the constraints do not refer to the margins of a contingency table. Continuous as well as discrete covariates may be used in the adjustment, and it is possible to check directly whether the constraints can be satisfied. Methods are proposed for the use of weighted data for various Census purposes, and for adjustment of covariate information on characteristics of omitted households, such as income, that are not directly considered in undercount estimation.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214589
    Description:

    The U.S. Bureau of the Census uses dual system estimates (DSEs) for measuring census coverage error. The dual system estimate uses data from the original enumeration and a Post Enumeration Survey. In measuring the accuracy of the DSE, it is important to know that the DSE is subject to several components of nonsampling error, as well as sampling error. This paper gives models of the total error and the components of error in the dual system estimates. The models relate observed indicators of data quality, such as a matching error rate, to the first two moments of the components of error. The propagation of error in the DSE is studied and its bias and variance are assessed. The methodology is applied to the 1986 Census of Central Los Angeles County in the Census Bureau’s Test of Adjustment Related Operations. The methodology also will be useful to assess error in the DSE for the 1990 census as well as other applications.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214590
    Description:

    This paper presents results from a study of the causes of census undercount for a hard-to-enumerate, largely Hispanic urban area. A framework for organizing the causes of undercount is offered, and various hypotheses about these causes are tested. The approach is distinctive for its attempt to quantify the sources of undercount and isolate problems of unique importance by controlling for other problems statistically.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214591
    Description:

    To estimate census undercount, a post-enumeration survey (PES) is taken, and an attempt is made to find a matching census record for each individual in the PES; the rate of successful matching provides an estimate of census coverage. Undercount estimation is performed within poststrata defined by geographic, demographic, and housing characteristics, X. Portions of X are missing for some individuals due to survey nonresponse; moreover, a match status Y cannot be determined for all individuals. A procedure is needed for imputing the missing values of X and Y. This paper reviews the imputation methods used in the 1986 Test of Adjustment Related Operations (Schenker 1988) and proposes two alternative model-based methods: (1) a maximum-likelihood contingency-table estimation procedure that ignores the missing-data mechanism; and (2) a new Bayesian contingency table estimation procedure that does not ignore the missing-data mechanism. The first method is computationally simpler, but the second is preferred on conceptual and scientific grounds.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214592
    Description:

    There are persuasive arguments for and against adjustment of the U.S. decennial census counts, although many of them are based on political rather than technical considerations. The decision whether or not to adjust depends crucially on the method of adjustment. Moreover, should adjustment take place using say a synthetic-based or a regression-based method, at which level should this occur and how should aggregation and disaggregation proceed? In order to answer these questions sensibly, a model of undercount errors is needed which is “level-consistent” in the sense that it is preserved for areas at the national, state, county, etc. level. Such a model is proposed in this article; like subareas are identified with strata such that within a stratum the subareas’ adjustment factors have a common stratum mean and have variances inversely proportional to their census counts. By taking into account sampling of the areas (e.g., by dual-system estimation), empirical Bayes estimators that combine information from the stratum average and the sample value, can be constructed. These estimators are evaluated at the state level (51 states, including Washington, D.C.), and stratified on race/ethnicity (3 strata) using data from the 1980 postenumeration survey (PEP 3-8, for the noninstitutional population).

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214593
    Description:

    In Australia, population estimates have been obtained from census counts, incorporating an adjustment for under-enumeration in 1976, 1981 and 1986. The adjustments are based on the results of a Post Enumeration Survey and demographic analysis. This paper describes the methods used and the results obtained in adjusting the 1986 census. The formal use of sex ratios as suggested by Wolter (1986) is examined as a possible improvement of the less formal use made of these ratios in adjusting census counts.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214594
    Description:

    A significant increase in coverage error in the 1986 Census is revealed by both the Reverse Record Check and the demographic method presented in this paper. Considerable attention is paid to an evaluation of the various components of population growth, especially interprovincial migration. The paper concludes with an overview of two alternative methods for generating postcensal estimates: the currently-in-use, census-based model, and a flexible model using all relevant data in combination with the census.

    Release date: 1988-12-15

  • Articles and reports: 12-001-X198800214595
    Description:

    Estimates of undercoverage in the Canadian Census of Population have been produced for each Census since 1961, using a Reverse Record Check method. The reliability of the estimates is important to how they are used to assess the quality of the Census data and to identify significant causes of coverage error. It is also critical to the development of methods and procedures to improve coverage for future Censuses. The purpose of this paper is to identify potential sources of error in the Reverse Record Check, which should be understood and addressed, where possible, in using this method to estimate coverage error.

    Release date: 1988-12-15
Reference (2,038)

Reference (2,038) (0 to 10 of 2,038 results)

  • Classification: 68-516-X
    Description: This product presents the Public Sector Universe, defined by Statistics Canada as a list of institutional units that are included in the economic measurement of governments in Canada. An institutional unit is defined as an economic entity that is capable, in its own right, of owning assets, incurring liabilities, and engaging in economic activities and in transactions with other entities. It includes the sectors of education, health, general government and government business enterprise sectors for all levels of government in Canada, annually, since 2008.
    Release date: 2026-11-20

  • Surveys and statistical programs – Documentation: 98-301-X
    Description: The Census Dictionary is a reference document which contains detailed definitions of Census of Population concepts, variables and geographic terms, as well as historical information.

    By referring to the Census Dictionary, both beginner and intermediate data users will gain a better understanding of the data and how to compare variables between census years.

    The Census Dictionary will be released iteratively starting with geography and non-data dependent topic definitions, tables, figures and appendices with additional content made available based on subsequent topic releases.

    Release date: 2026-11-18

  • Geographic files and documentation: 92-156-G
    Description: This reference guide is intended for users of the Census of Population Correspondence Files (92-156-X). It provides an overview of the general methodology used to create these files, as well as important technical information.
    Release date: 2026-11-18

  • Geographic files and documentation: 92-156-X
    Description: These files describe the relationships between the geographic areas of the most recent Census of Population and the same geographic areas from previous census.

    Three correspondence files are available: the "Dissemination Area correspondence file", the "Dissemination Area and Land Area correspondence file", and the "Dissemination Block correspondence file".

    Each file contains a unique identifier for the most recent census geographic area and the corresponding unique identifier for the previous census area. An indicator specifying the degree of correspondence between the geographic areas, which facilitates the comparison of data across census years, is also provided.

    A reference guide is available (Correspondence Files, Reference Guide, 92-156-G).
    Release date: 2026-11-18

  • Geographic files and documentation: 92-160-G
    Description: This reference guide is intended for users of the Census of Population Boundary Files (92-160-G). It provides an overview of the general methodology used to create these files, as well as important technical information.
    Release date: 2026-11-18

  • Geographic files and documentation: 92-160-X
    Description: These geographic files represent the geographic boundaries used for the dissemination of the Census of Population data. They are available by Provinces and Territories, Census Divisions, Census Consolidated Subdivisions, Census Subdivisions, Economic Regions, and Aggregate Dissemination Area.

    A reference guide is available (Boundary Files, Reference Guide, 92-160-G).
    Release date: 2026-11-18

  • Geographic files and documentation: 92-163-X
    Description: This geographic file represents the dissemination block boundaries used for the dissemination of the Census of Population data.

    A reference guide is available (Boundary Files, Reference Guide, 92-160-G).
    Release date: 2026-11-18

  • Geographic files and documentation: 92-169-X
    Description: This geographic file represents the dissemination area boundaries used for the dissemination of the Census of Population data.

    A reference guide is available (Boundary Files, Reference Guide, 92-160-G).
    Release date: 2026-11-18

  • Geographic files and documentation: 92-171-X
    Description: This geographic file represents the federal electoral district boundaries used for the dissemination of the Census of Population data.

    A reference guide is available (Boundary Files, Reference Guide, 92-160-G).
    Release date: 2026-11-18

  • Geographic files and documentation: 92-500-G
    Description: This reference guide is intended for users of the Census of Population Road Network File (92-500-X). It provides an overview of the general methodology used to create this file, as well as important technical information.
    Release date: 2026-11-18